Design & construction of stairs & staircases

When designers ar coming up with areas inside the house stairs ar typically redesigned again and again before they’re engineered. Stairs not solely ought to be settled in associate degree applicable location, however they have to be snug to use and safe for his or her users.

Here ar five essential tips to confirm your stairs ar designed and made for comfort, vogue & safety. keep in mind all things ought to be confirmed by bearing on the most recent Australian codification (BCA).
Location, location, location
Deciding on the placement of your stairs must occur early within the style section.

Staircase location will vary reckoning on your necessities however most stairs ar centrally settled and handy to the most entrance additionally because the main elbow room. Note within the set up below, the orange colored stairs ar in an exceedingly sensible central location; i.e. about to the entry and living areas. this protects period of time round the home and offers privacy to different areas within the home. The brown colored stairs aren’t in an exceedingly sensible central location. They force folks to travel through the area and conjointly create users pay longer about to different areas within the house

Space and style
Stairs will take up a substantial quantity of area. you will ought to consider circulation area round the stairs additionally. you’ll safely assume that a steps would force a minimum breadth of one.1m and a minimum height of three.5m long. in an exceedingly typical Australian home is not uncommon for a steps to be one.4m wide x five.9m long.

Do not forget your support dimensions can ought to be reflected onto all floor plans.
Avoid planning stairs any narrower than 880mm wide once finished (i.e. with wallboard on walls). Australian standards for support construction can afford narrower stairs however narrower stairs are going to be uncomfortable to use, particularly if you put in a hand rail or have winders.
If area and prices ar a problem, keep your stairs straightforward and multifunctional. Plans A & B on top of show storage areas beneath the steps. this can be common with steps style it’s done to avoid wasted area and to cover stairs that will differentwise interfere with head heights in other areas.

If you have got no selection however to incorporate stairs in inhabitable aras (these are areas that need a ceiling height of two.4m) there ar some tips from the trades you must recognize.
Tips from the trades
Use the face of your support as a lighting divider (See section above)
Only 2/3 of a inhabitable area must have a ceiling height of two.4 the remainder is lower (please visit the most recent BCA requirements).
A bathroom isn’t thought of a inhabitable area and may have ceilings as low as a pair of.1m high (please visit the most recent BCA requirements).
Ensure the finished face of your support in no but 2m off finished floor level close to doorways.

You might be interested in